All Blogs

Using PLX Kiwi WiFi. iPhone shows P0455 error code. My Garage shows P0485 error code Why the difference?

2002 Nissan Sentra Codes Code Mfg Abbr. Description ================================= P0011 INT/V TIM CONT-B1 P0037 HO2S2 HTR (B1) P0038 HO2S2 HTR (B1) P0043 HO2S3 HTR (B1) P0044 HO2S3 HTR (B1) P0101 MAF SEN/CIRCUIT P0102 MAF SEN/CIRCUIT P0103 MAF SEN/CIRCUIT P0107 ABSL PRES SEN/CIRC P0108 ABSL PRES SEN/CIRC P0112 IAT SEN CIRCUIT P0113 IAT SEN CIRCUIT P0117 ECT SEN/CIRC P0118 ECT SEN/CIRC P0121 APP SEN/CIRC P0122 APP SEN/CIRC P0123 APP SEN/CIRC P0125 ECT SENSOR P0127 IAT SEN CIRCUIT P0128 THERMSTAT FNCTN P0138 HO2S2 (B1) P0139 HO2S2 (B1) P0144 HO2S3 (B1) P0145 HO2S3 (B1) P0171 FUEL SYS-LEAN-B1 P0172 FUEL SYS-RICH-B1 P0181 FTT SENSOR P0182 FTT SEN/CIRCUIT P0183 FTT SEN/CIRCUIT P0217 ENG OVER TEMP P0300 MULTI CYL MISFIRE P0301 CYL 1 MISFIRE P0302 CYL 2 MISFIRE P0303 CYL 3 MISFIRE P0304 CYL 4 MISFIRE P0327 KNOCK SEN/CIRC-B1 P0328 KNOCK SEN/CIRC-B1 P0335 CKP SEN/CIRCUIT P0340 CMP SEN/CIRCUIT P0350 IGN SIGNAL-PRIMARY P0400 EGR SYSTEM P0403 EGR ...

I received my golink cable this week and have to say I really enjoy the golink/fuzzyluke software. Thought I would post a list of some of my initial wants from future updates and some others could also add input to make this the best program out there: 1) Make it work with the golink cable :) 2) Screen rotation. It probably doesn't matter when using wireless but with the cable it would be nice. 3) Make it optional to show voltage/resistance readings on sensors as well as %. It would add some extra troubleshooting abilities for techs. Especially on items like throttle position.

I can't figure out how to get my iPhone to sync with My Garage on the FuzzyLuke site. I've triple checked my account info in the goLink software, still nothing. I can't find a sync button anywhere (although someone else mentioned a "sync cars" button on another post), besides, I thought I had read that the software uploaded automatically once account info is entered.

Is it possible to sync both my cars on two iPhone without having four vehicle show up in my garage. Basically, I have two cars and two iPhones and I want to be able to use them all interchangeably

i don't know why, but when i push on the iphone "Sync cars" the loading circle never stop and when i came in my garage my car is not syncronized!!!!!! any help about it

can i deleting cars in my garage... i 've 4 now... all the same model... i want only one... please help...

Is there an difference in reading data/codes/values or capabilities between GoLink and FuzzyCar? Or is the only difference the connection wire/wireless?

Have a BMW 335i i just managed to connect the fuzzy logic with WIFI kiwi PLX. When i look at the values only a few are displayed like rpm, Engine coolant, speed but the most important one like IAT, Intake manifold pressure and timing advance are just displayed as LOADING? i have experienced the same issue with REV 2.0 . Is this related to BMW ECU standards? i use another type of cable as well (BT-cable) with a pc program and that can read all the info mentioned above. Thanks Enrico

i purchased this feature 3 days ago... but i found myself that bmw engine code aren't supported.... why aren't supported.??? i have a bmw 135i...

i'm italian.... in future update it could be possible have kmh/kg/C° in this app??? thx

I'd like to first off thank the creators of this fine product as I've had a ton of fun analyzing all the data coming from my car. I'm also really looking forward to the upcoming 2.0 update as from the screenshot posted on the twitter page it looks awesome. I just ran into a little problem today as I went to scan a friends car for some stored CEL codes, and I couldn't find a way to view them. I could see at the top of the screen that 2 trouble codes were found, but you can't go beyond that. I know you can view them if they are caught as your logging data or the CEL light stays on, but in this case the codes were stored so I couldn't view or clear them. Is there a way to do this and if not I'd really appreciate if this ...

Using FuzzyCar with the PLX device I get "Initialization Failed" I have PLX set to STATIC MODE: IP 192.162.0.11 SM 255.255.255.0 Router 192.162.0.10 suggested by one post Fuzzy set to IP 192.162.0.11 Port 35000 PLX seems to work with REV Lite

Great product. I am loving it so far. I am having trouble clearing the lights on a 02 ford windstar though. I have a p0460 (fuel circuit) error that I want to clear but hitting the clear lights button doesnt clear them. any thoughts as to why

hello i just bought the fuzzy car and everything goes fine the only i cant do is the sync with my account i also follow the instruccion on my iphone screen to dissable my plx wifi before do the sync still not work i also check my passwords and everything still cant sync my iphone with my online account what i can do thankyou

Did fuzzyluke works with OBD_II CAN? Is it cover for Land Rover vehicle? If it does, is it cover Mfg Fault codes like P1XX as well? Thx

Am I right here to get some support? I hope so. FuzzyLuke drops WiFi-connection after a few seconds. It first updates all data and after a while it drops connection, Kiwi's Link-Lamp starts blinking. To reconnect I have to start reading out ECU again. (Then the same...) "Rev"-App i.E. keeps connection established till terminating the App. Another question is: how can metric (SI) values be set. There is a little more in the world than PSI and LBS!

Just wondering if anyone has found another ODB2 wifi scanner that will work with the fuzzycar app? I have seen other scanners for much cheaper then the Kiwi scanner but not sure they will work properly.

Help us write informational articles

Please write us a good review!

Top secret FUZZYLUKE projects!